|
DRIVE - STEPPER - POSITION
SELECTION MATRIX
A variety of advanced, stand-alone controllers for positioning of 2 phase, bipolar stepper motors.
See underneath the table for explanations of the
column headings.
For abbreviations, terms and definitions click
here for the Glossary page
| MODEL/SERIES
|
OUTPUT(A/V)
|
FORMAT
|
INSTALL IN
|
TYPE
|
SUPPLY
|
| IXE-alpha |
18A/170V |
Sub-rack/Housed |
Rack/Stand alone |
Multi-axis controller |
AC |
| SAM-alpha |
18A/170V |
Sub-rack/Housed |
Rack/Stand alone |
Axis controller |
AC |
| OMC-alpha |
9A/70V |
Housed |
Wall |
Axis controller |
AC/DC |
| TMC-alpha |
9A/70V |
Housed |
Wall |
Multi-axis controller |
AC/DC |
COLUMN HEADINGS:
MODEL/SERIES - Used to uniquely identify the product (Model) or a family
of related products (Series).
OUTPUT(A/V) - The rated output current at a given form factor/rated DC
bus voltage of the device. Form factor is the purity of the output current,
where 1.00 is pure DC and >1.00 reduces the available torque and increases
heat losses.
FORMAT - Chassis: without an enclosure, for panel mounting or siting
in an enclosure.
Housed: an enclosed drive for wall, cabinet or stand-alone installations.
INSTALL IN - Panel: for siting inside a panel or cabinet.
Wall: designed for fixing to bulkheads, gear plates or panels.
TYPE -
SCR-DC/SW: a low cost, variable speed drive that powers a Permanent Magnet
DC and/or Shunt-wound motor.
SUPPLY -
AC: various mains supplies, with or without transformer, are possible.
DC: the device needs direct current, often unregulated.
AC/DC: both types of supply are accepted.
|
Click
here to email us with any questions or comments about this web
site.