AC MOTOR - SERVO

SELECTION MATRIX

Synchronous and asynchronous technologies in metric frame sizes for high performance and precisely controlled speed and position with options for servo gearing, brakes and many feedback formats.

See underneath the table for explanations of the column headings.

For abbreviations, terms and definitions click here for the Glossary page

COLUMN HEADINGS:

MODEL/SERIES - Used to uniquely identify the product (Model) or a family of related products (Series)

TORQUE (Nm) - The rated torque that is produced with rated current at rated speed. According to the motor and drive capacities, peak torque outputs and speeds are much greater.

POWER (kW) - The rated output power at rated speed, or often at base speed, and at rated torque. The motor and drive characteristics influence these rated or base speed values. Examples - (1) constant torque up to base speed and constant power thereafter, or, (2) torque drops off by 10 percent between rated speed and maximum continuous speed.

CURRENT (A) - The rated current that provides the rated torque at the rated speed. Other current values on the datasheet may refer to peak current and continuous current at stall/zero speed.

SPEED (rpm) - The base speed or rated speed at rated frequency/voltage when drawing the rated current. Higher speeds are often possible, but with less torque.

NOTES - Important features of a particular model/series to aid with the selection process.